many thank man!

I then purchased Reason 2 :) and have been using it ever since. you should really think about upgrading! :lol: :puf_bigsmile: i was introduced by a friend when go to his house to muck around sometime near 2001 with sampling some guitar playing. he showed me this crazy new program and also rebirth a...

Hello Try to copy patch and in one of patches turn off thors sequencer and try by your ears to copy sequence from another thor. When it is just first 8 notes, then it dont waste so much time. To eliminate strange sounds try to, like logue said, turn off delay, and set thors pitchwheel to 0 (matrix ...

So you connected the Matrix TO Thor, i was a bit confused. Finally i still bet on the LFOs if they are not in sync or the Pattern length, Speed or Loop. But if it only changes after a longer play period, it is, well, weird. Maybe a Delay FX or any other FX? sorry loque for the confusion! i am not r...

helo to loque and ljekio

the cv curve cable was a part of the patch. i have actually bypassed the matrix to see if it stops producing the random ugly notes during the pattern, but it did not. here is what it looks like anyway:

Check your LFOs in the mod matrix of Thor. Make them synced and reduce length to have always the same within a loop. But you should understand that this also changes the sound. hi loque i just want to thank you for the tip. i played around with the lfos and sync setting but still couldnt get the pa...

hello to everybody i have been using a really cool patch in the thor sequencer run into matrix (filter 1 eq from thor into curve cv on matrix) which i like the sound of very much. what i find puzzling and frustrated is that the thor sequencer loop (set to repeat/random/note/4steps) changes the arpeg...

Just a few points -- sample rate are the numbers like 44100, 48000, 88200, 96000, that set the data rate for the audio signal converter. Numbers like 128, 256, 512 are buffer sizes, that affect the minimum theoretical latency, DSP load spike tolerance and other things. A higher sample rate uses mor...

We all have to start somewhere! There is so much to learn, don't ever be embarrassed about asking a 'dumb question' , the users on here are really incredibly helpful. They have answered many a dumb question of mine! yes you are totally right! thank you also i just listened to a few of your songs on...

:oops: this going to sound soo dumb but after trying everything remove send fx bypass compresosrs etc and no change i got very frustrated and shut down reason completely. when i come back few days later and start up the project again, latency is gone :shock: :lol: i guess maybe jiust a system overlo...

hello everyone i am sorry for another nubby question recently i was playing around with the audio pref in reason and experimented with a lower sample rate just to see if any difference. i went down to 256 and 128 but not for very long as i was only just playing kong with a beatstep and didnt erally ...

Check your SSL input signal flow. There's a chance you have the EQ/Filter before insert FXs. hello can i please ask you about this ? when i read your reply i decided to check my own signal chain and i have DYN/EQ/INSERT. is there a benefit in going to insert fx and then eq versus sending the desire...

hello to all i have to ask this question please. since my days using logic and cubase i would always copy and paste any loops samples etc that i wanted to use in a song, into the project folder (and then a sub folder called samples) as i was of the understanding that this would make it easier on th...

hello to all i have to ask this question please. since my days using logic and cubase i would always copy and paste any loops samples etc that i wanted to use in a song, into the project folder (and then a sub folder called samples) as i was of the understanding that this would make it easier on the...

Check your SSL input signal flow. There's a chance you have the EQ/Filter before insert FXs. hello can i please ask you about this ? when i read your reply i decided to check my own signal chain and i have DYN/EQ/INSERT. is there a benefit in going to insert fx and then eq versus sending the desire...

And this may or may not blow your mind... You can also add racks to the left of the Master section. That's where I keep my Send FX (rather than below the Master Section), mind blown. i did not even know you could add racks at all...... :oops: currently trying to find the shortcut for it! edit: work...

you are an excellent person! thank you

my fault for not being specific about the type of collaboration but all of the replies make sense. for this project it will be another artist adding vocals and some guitar to a production containing all other things (drums, synths, bass etc). i suppose i just want it to sound as nice as could be rea...

this is great thank you very much i look forward to testing them out and also watching the tutes

Marc64 wrote:d*mn nice !!!


Skickat från min iPhone med Tapatalk

OT but i really enjoyed your soundcloud track in the sig block

If you are collaborating, generally you are going to have multiple iterations. I think your first iteration at the very least should be extremely rough, with any fx and mixing simply enough to convey your musical ideas. The more you do to make the track sound completed, the more you will shut the d...

I don't think there are any easy shortcuts when it comes to this kinda thing. Each track is going to need to be treated differently. So, finding a preset or something that you can slap on any song and instantly get good results is probably not very likely. However, if your mix is good, it shouldn't...

hello everyone your favourite reason novice again. i have one question to ask - do have any particular 'final' mix effects or mastering that you do or consider essential before you consider a track ready to be shared with someone else for their input and musical ideas? this is not the absolute final...

You will see stereo pair outputs in that drop down menu. So outputs 1/2 are the main outputs (aka master fx, because they route through the master fx). You'll see; master fx (1/2), 3/4, 5/6, 7/8, 9/10, 11/12, 13/14, 15/16. Use the pan parameter for each pad to get mono pad outputs. Hard left for od...

You need to set the pad outputs in Kong (look for a drop down menu at the bottom of the device "main output" for example) and use hard panning (in Kong) left and right to get each pad to output to its own mixer channel. I hope this helps :) hey man yes that is a big help! i havent actually tried to...