ReasonTalk.com

RE Solaris by Skrock Music )..

Note from the menu there is a ENV/LFO and LFO/ENV, they are the same screens except, ENV/LFO takes you to the ENV controls (faders) first and the LFO/ENV to the standard Knob page, from both menu options the faders and knobs are mapped at the same time and there is also an in-screen option to switch between the screens (see note below)

There is a Fader\Knob and Random option on every page, remember when in the Fader screen, Toggle/view and Toggle/Mute buttons switch between the fader views of "buttons" to "upper knobs" (the ones above the Faders) mainly needed for the Osc pages.

Note: All knobs, buttons, faders and ch knobs on the HOME page are defaults and will be mapped in if the sub menu does not use them controls

Lizard, I noticed that you missed the Aurora mapping in the last update and don't forget the updated the "Zero" mappings that include the new Solo buttons.

Regards
PoohBear

wowow, how Fast!!!
you'll have out there RG rob Papen?

arqui wrote:wowow, how Fast!!!
you'll have out there RG rob Papen?

I have been in contact with Rob Papen and they are getting the data for the remote mappings, when it's smallish RE to map out I don't have a problem doing it all from hand however the PG has about 300 controls to map, so even thou I still have to write the file by hand, having a list to work from is a big big help.

REF Solaris, I beta tested it so hence it was already done for launch....

Carly(Poohbear) wrote:

arqui wrote:wowow, how Fast!!!
you'll have out there RG rob Papen?

I have been in contact with Rob Papen and they are getting the data for the remote mappings, when it's smallish RE to map out I don't have a problem doing it all from hand however the PG has about 300 controls to map, so even thou I still have to write the file by hand, having a list to work from is a big big help.

REF Solaris, I beta tested it so hence it was already done for launch....

The sequencer´s Part, I think it is not necessary, because it would be difficult to use on the control keyboard.
anyway, tell me where I can help you.
you need the list of commands ordered by sectors?
regards

arqui wrote: The sequencer´s Part, I think it is not necessary, because it would be difficult to use on the control keyboard.
anyway, tell me where I can help you.
you need the list of commands ordered by sectors?
regards

But yes having a remote names in a list is a big help.

ok, now I get to work with that

arqui wrote:ok, now I get to work with that

Rob Papen RGRE mapping.

There is a Fader\Knob and Random option on every page, remember when in the Fader screen, Toggle/view and Toggle/Mute buttons switch between the fader views of "buttons" to "upper knobs" (the ones above the Faders).

Note: All knobs, buttons, faders and ch knobs on the HOME page are defaults and will be mapped in if the sub menu does not use them controls

Default Upper Knobs:
1-5 = EQ
6-7 = Filter Cutoff / Q
9 = Filter Mode (Important one as this one is not mapped at all to the standard Channel knobs)

Faders:
1-3 = Stroke Volume
5-7 = Stroke Decay

Buttons:
1-6 = Sequence buttons

Updated 27th April 2016 14:28 Note: You can not map the same RE control to different knobs (Nektar) at the same time, EG if you use the menu to go to the EQ screen, the ch Knobs are now mapped to the EQ and the Upper Knobs 1-5 will be blank, as soon as you move screens\channels, the upper knobs 1-5 will become the EQ again.

Regards
PoohBear

Carly(Poohbear) wrote:

arqui wrote:ok, now I get to work with that

Rob Papen RGRE mapping.

Knocked up this quick dirty version (not finished).

It is missing FX and SEQ stuff.

PanoramaRGRE.txt

Regards

if you need the FX stuff, tomorow work on it... THanks

arqui wrote: if you need the FX stuff, tomorow work on it... THanks

Rob Papen have just sent through the remote mapping so I will see what I get through tonight with it.. (will post their mapping to the remote mapping thread in RE forum)

ok, I just see it!!!
if you need help on anything else just let me know, I'll help you with pleasure.
Greetings and thanks for sharing.

arqui wrote:ok, I just see it!!!
if you need help on anything else just let me know, I'll help you with pleasure.
Greetings and thanks for sharing.

Just made another update to the PGRE mapping, just over 490 controls mapped !!!

To get to the SEQ buttons (mapped them to the buttons), when in fader view remember the Toggle/view and toggle/mute buttons switch the buttons to top row knobs view.

Still needs a bit sorting out.

wowow you are a machine!!!!

Excellent work Poohbear !

arqui wrote:wowow you are a machine!!!!

freddykr wrote:Excellent work Poohbear !

PGRE updated as of the 27th April (see original comment for update, file header V1.1)



Regards
PoohBear

Keep up the good work PoohBear! I'll update the map when you let me know it is as complete as you are going to make it.

Lizard wrote:Keep up the good work PoohBear! I'll update the map when you let me know it is as complete as you are going to make it.

I don't think I will be making any more changes unless there is some feedback for changes so lets give people a few days, if no changes are asked for roll it up

Mapping done for the Lithium..

Bit of an experiment, let me know what you think.

Basically added flexibility so all the controls can be mapped to either the Main Knobs or Faders or Upper Knobs.

There are 3 menus, 1 main(Top) and 2 sub (Upper knobs and Faders)
Main(Top) selects what is mapped to the main ch Knobs
Upper Knobs, ones above the Faders selects what is mapped to them knobs.
Faders selects what is mapped to the Faders
Known issues what nothing I believe can be done, between the RE and Nektar the mappings are 1 to 1 only, so if you select OSC 1 for Top, Upper and Faders at the same time only one set of controls is mapped and the others would be blank...
Once you select another sub menu or go back to the top menu, you have to select the menu again to make your selection.

Regards
PoohBear

Carly(Poohbear) wrote:

Lizard wrote:Keep up the good work PoohBear! I'll update the map when you let me know it is as complete as you are going to make it.

I don't think I will be making any more changes unless there is some feedback for changes so lets give people a few days, if no changes are asked for roll it up

99% testing work perfect, thanks carly.... superb work....

Hey!!!! An update! Very sorry for the delay but I've been busier than a one legged man in a but kicking contest.

This is a decent update. This includes a lot from Poohbear a few from myself. Included in the file are as follows:

Poohbear
Vecto by Rob Papen
Lithium by Zakuna Prod
Solaris by Skrock
RP's RGRE by Rob Papen

Lizard
L1mDrum by Quadelectra
Crapre Number 2 by Peff

Hope these are of use. You can download the map in the first post.

Many thanks _

Hi,

Thanks a lot for your work, I like my P4 again

So, I decided to give my contribution and first map : Kuassa EVE-MP5

Let me know if there is something you don't like with it.

Regards
Fana

Edit : a new version without menu access but direct buttons access to the MID-EQ and PROG-EQ

My second cents :
Doodov Digital Design SW4-C

Two versions :
- "By Section" with an access to each section separately.
- "Global"with direct access to all toggle, repeat and chance sections and a Global page to access other parameters

I first wrote the "By section" map but I realized that I prefer to have access directly to activate and modify all sections in one page.
So for me then "Global" map is better.

Enjoy !

Edit : sorry two small issues with Gate and Momentary (defined as toggle instead of trigger), attached files updated

The FM4 map doesn't work with my P1.
Has someone used it already and can tell me it's working fine?

cheers

The FM4 isn't in my list of mapped Re. Did someone do it? Was it posted here?

That's right, it doesn't seem to come from this thread, and I don't remember where I got it.
Maybe that's why it's not working...