ReasonTalk.com

Hi,

I'm running Mac. I've connected Dexibel S7 piano over USB. This instrument features usb audio streaming. So it could be a nice ability to record its piano sound digitally. This device is visible as two separate units: Dexibell playback and Dexibell capture. It's fine so far but... there's only <Dexibell playback> visible in Reason so I can route the sound from cpu via this piano (I can see no logical reason to do so btw)
Do you think it's Reason's fault? Attached you can find some shots to visualize what's going on - audio configuration, sample robot (being able to receive sound from Dexibell) and Reasons preferences (not being able to even see this input).

not having the piano myself this is just a guess. When you connect it through USB it works as an normal audio interface and therefor sends the audio from reason out to the piano and it will work only as a midi controller with reason.
If you want to record sounds from the piano you need to connect the output to the input on the back. so no it's not Reason fault, it's they way your piano is build

Hi, Thanks for your reply.
This instrument supports USB audio feature, so should transmit sound over USB and it does actually (bear in mind that I could do it in Sample |Robot).
I found the solution. Here it is:
https://help.reasonstudios.com/hc/en-us ... th-Reason-

Wylany165 wrote: ↑

26 Feb 2020

Hi, Thanks for your reply.
This instrument supports USB audio feature, so should transmit sound over USB and it does actually (bear in mind that I could do it in Sample |Robot).
I found the solution. Here it is:
https://help.reasonstudios.com/hc/en-us ... th-Reason-

Thanks for posting the solution. It's that kind of thoughtful that saves others from a bit of hair-pulling further down the line.