Hi there,
Long story short, after releasing my mixing tool in the form of combinator 2 for Reason 12, some folks out there asked me if they were compatible with reason 10.
Of courses they aren't, so i made them for Reason 10 and above with the limitations of the original Combinator.
Download : R10 A.sch3's Combinator Collection v1.0.1
NEW!
Fast Cleaning EQ
Changelog :
v1.0.1 = Initial release
No detail explanation as it speak for itself. Just turn the knobs and hear if you like it better or not.
Works well with kicks and drum tracks
Others Combi :
They are made the same way, with the same stock devices, less knobs and buttons but same sound characteristics.
BUS Mixing and Improving
Improve and enhance an instruments, track or a BUS of tracks
Vocal Singer Toolbox
Set the auto-leveler to 100%, fiddle with the de-esser, add reverb or don't (you're free to do your thing after that).
Pre-Mastering Multi-Tool
Give a little polish to the track before going to the mastering section
Mastering
Mastering made easy : Enable 1:1 Listen, crank the volume up. when the apparent loudness you are hearing goes down, it means you went too far, dial back a few notch and you're basically as loud as you can get without much distortions. In order to go above that, you'll need to work on your mix. Adding a bus compressor can also help.
Remember that loud doesn't mean "sounding good" Everything is in the mix.
Binaural & 3D FX
Trick your brain into thinking the sound stage is much deeper.
Resonance Taming
Spot the bad resonances on a track and dynamically remove it only when needed.
I'm going to add some more information in this post later. I'm also working on a video to show them in situation.
I hope you'll enjoys theses tools !
[STOCK]Upd! Fast Cleaning EQ - A.sch3's Combinator Collection for Reason 10 v1.0.1
Last edited by A.sch3 on 15 Aug 2022, edited 4 times in total.
Wow, that's really nice of you.
hello,
@A.sch3: a very kind gift for us R10 users
thanks for not forgetting about us
feels like christmas
cheers and eat well,
j
@A.sch3: a very kind gift for us R10 users
thanks for not forgetting about us
feels like christmas
cheers and eat well,
j
littlejamaicastudios
i7 2.8ghz / 24GB ddr3 / Quadro 4000 x 2 / ProFire 610
reason 10 / reaper / acidpro /akai mpk mini / korg padkontrol / axiom 25 / radium 49
'i get by with a lot of help from my friends'
i7 2.8ghz / 24GB ddr3 / Quadro 4000 x 2 / ProFire 610
reason 10 / reaper / acidpro /akai mpk mini / korg padkontrol / axiom 25 / radium 49
'i get by with a lot of help from my friends'
Update !
NEW !
-------------------------------------------------------------
### A.sch3's Fast Cleaning EQ###
*** v1.0.1 ***
- Initial release
Every other combi updated with different font for the help text
NEW !
-------------------------------------------------------------
### A.sch3's Fast Cleaning EQ###
*** v1.0.1 ***
- Initial release
Every other combi updated with different font for the help text
Hello !
As i've added new Combi FX to Reason 12, i made sure to port them to Reason 10.
Since i can't update the main topic anymore (time has passed and it is limited), here the news :
Download A.sch3's Combinator Collection v1.0.2 for Reason 10 here
New FX :
- A.sch3's Leadifier FX v1.0.2
- A.sch3's NastyBasser FX v1.0.2
- A.sch3's De-Breather FX v1.0.2
Updated :
- A.sch3's Vocal Singer Toolbox v1.0.2
A.sch3's Leadifier FX v1.0.2
Makes leads sounds more "lead-y"
The "FX Volume" is a knob that will blend the processed signal with the original.
Reverb comes after the processed signal.
A.sch3's NastyBasser FX v1.0.2
Makes any sounds more "Nasty" and Bassy, works shockingly well on "pluck" sound
My recent track "Enter The Room" was made with this combi FX ! Check it out :
A.sch3's De-Breather FX v1.0.2
This FX will try to reduce the volume of any sound outside of what the detectors are hearing.
You mainly can remove "breath" sounds, but as you are in control of what the detector are triggered by, you also try to remove other content you don't move, like recording noise in-between the notes or vocals.
I currently am making videos for thoses last 3 combi.
As i've added new Combi FX to Reason 12, i made sure to port them to Reason 10.
Since i can't update the main topic anymore (time has passed and it is limited), here the news :
Download A.sch3's Combinator Collection v1.0.2 for Reason 10 here
New FX :
- A.sch3's Leadifier FX v1.0.2
- A.sch3's NastyBasser FX v1.0.2
- A.sch3's De-Breather FX v1.0.2
Updated :
- A.sch3's Vocal Singer Toolbox v1.0.2
A.sch3's Leadifier FX v1.0.2
Makes leads sounds more "lead-y"
The "FX Volume" is a knob that will blend the processed signal with the original.
Reverb comes after the processed signal.
A.sch3's NastyBasser FX v1.0.2
Makes any sounds more "Nasty" and Bassy, works shockingly well on "pluck" sound
My recent track "Enter The Room" was made with this combi FX ! Check it out :
A.sch3's De-Breather FX v1.0.2
This FX will try to reduce the volume of any sound outside of what the detectors are hearing.
You mainly can remove "breath" sounds, but as you are in control of what the detector are triggered by, you also try to remove other content you don't move, like recording noise in-between the notes or vocals.
I currently am making videos for thoses last 3 combi.
hello,
i am on R10 windows 7
i click on the link to download the patches
and the download is not 'zipped'
it appears you have to download each patch separately
i am using 'pale moon' browser (an offshoot of firefox browser)
if we have to download each patch
that's cool
just also wanted to say superthanks
merry new year
jcheers
i am on R10 windows 7
i click on the link to download the patches
and the download is not 'zipped'
it appears you have to download each patch separately
i am using 'pale moon' browser (an offshoot of firefox browser)
if we have to download each patch
that's cool
just also wanted to say superthanks
merry new year
jcheers
littlejamaicastudios
i7 2.8ghz / 24GB ddr3 / Quadro 4000 x 2 / ProFire 610
reason 10 / reaper / acidpro /akai mpk mini / korg padkontrol / axiom 25 / radium 49
'i get by with a lot of help from my friends'
i7 2.8ghz / 24GB ddr3 / Quadro 4000 x 2 / ProFire 610
reason 10 / reaper / acidpro /akai mpk mini / korg padkontrol / axiom 25 / radium 49
'i get by with a lot of help from my friends'
Hi littlejam !
You are welcome, merry new year you too !
Click the download button that is located on the top right corner :
This will download the .zip directly so you wont have to download each patch by hand
You are welcome, merry new year you too !
Click the download button that is located on the top right corner :
This will download the .zip directly so you wont have to download each patch by hand
Yeah unfortunatly the link is now broken and i can't edit my post to update it.
You can find the one for Reason 12 here : viewtopic.php?f=69&t=7528343
You can find the one for Reason 12 here : viewtopic.php?f=69&t=7528343
Thanks! Really cool to see what can be done in Combinator 2. Will try them in project.A.sch3 wrote: ↑31 Dec 2022Yeah unfortunatly the link is now broken and i can't edit my post to update it.
You can find the one for Reason 12 here : viewtopic.php?f=69&t=7528343
While doing the video for these combi, i notice a little bug on the Reason 10 versions.
Here the new download link : R10 A.sch3's Combinator Collection v1.0.3
--------------------------------------------------------------
### A.sch3's De-Breather FX ###
*** v1.0.3 ***
- HOTFIX : Muting the detector passing through when in normal operation
--------------------------------------------------------------
### A.sch3's Leadifier FX ###
*** v1.0.3 ***
- HOTFIX : Lowering the amount of variation of the "Auto-Morph" function
Sorry for the inconvenience !
Here the new download link : R10 A.sch3's Combinator Collection v1.0.3
--------------------------------------------------------------
### A.sch3's De-Breather FX ###
*** v1.0.3 ***
- HOTFIX : Muting the detector passing through when in normal operation
--------------------------------------------------------------
### A.sch3's Leadifier FX ###
*** v1.0.3 ***
- HOTFIX : Lowering the amount of variation of the "Auto-Morph" function
Sorry for the inconvenience !
hello,
@A.sch3: thank you for the instructions and the update to the R10 combis
have a blessed new year and eat well,
j
@A.sch3: thank you for the instructions and the update to the R10 combis
have a blessed new year and eat well,
j
littlejamaicastudios
i7 2.8ghz / 24GB ddr3 / Quadro 4000 x 2 / ProFire 610
reason 10 / reaper / acidpro /akai mpk mini / korg padkontrol / axiom 25 / radium 49
'i get by with a lot of help from my friends'
i7 2.8ghz / 24GB ddr3 / Quadro 4000 x 2 / ProFire 610
reason 10 / reaper / acidpro /akai mpk mini / korg padkontrol / axiom 25 / radium 49
'i get by with a lot of help from my friends'
-
- Information
-
Who is online
Users browsing this forum: No registered users and 9 guests