Reasonistas SideChain ReAction Enveloper
- Reasonistas
- RE Developer
- Posts: 876
- Joined: 15 Jan 2015
- Location: Morristown, NJ USA
- Contact:
Just uploaded a quick #SCReTip video to quickly show how you can trim two drums loops to use the kick and snare from one and the hi-hats from the other. And of course at the end we slap on an SCRE to a synth track with the "Ducker" patch for instant ducking.
Last edited by Reasonistas on 07 Apr 2017, edited 1 time in total.
- frog974new
- Posts: 352
- Joined: 16 Jan 2015
- Contact:
i see you launch a contest patch for the next incoming update for this Re .
it'll be nice to re-orginaze the FSB .
1) Patch that use only stock device
one main folder for FX device
- signature patch folders
- an other folder for all other preset
one main folder for all combintor instrument device
- signature patch folders
2) Patch that require other RE
it'll be nice to re-orginaze the FSB .
1) Patch that use only stock device
one main folder for FX device
- signature patch folders
- an other folder for all other preset
one main folder for all combintor instrument device
- signature patch folders
2) Patch that require other RE
Thanks for the new video. Much clearer on what the strengths of this device is.Noel G. wrote:Just uploaded a quick #SCReTips video to quickly show how you can trim two drums loops to use the kick and snare from one and the hi-hats from the other. And of course at the end we slap on an SCRE to a synth track with the "Ducker" patch for instant ducking.
- Reasonistas
- RE Developer
- Posts: 876
- Joined: 15 Jan 2015
- Location: Morristown, NJ USA
- Contact:
Thanks for the suggestion. We will review and consider this.frog974new wrote:i see you launch a contest patch for the next incoming update for this Re .
it'll be nice to re-orginaze the FSB .
1) Patch that use only stock device
one main folder for FX device
- signature patch folders
- an other folder for all other preset
one main folder for all combintor instrument device
- signature patch folders
2) Patch that require other RE
Do you think you will make a full on tutorial video for SideChain ReAction for people completely new to this kind of FX of what every button and dial does?
Like Speo did when he released FrameCV on YouTube, it would be great to hear someone do a in depth walkthrough of SideChain ReAction
Sent from my iPhone using Tapatalk
Like Speo did when he released FrameCV on YouTube, it would be great to hear someone do a in depth walkthrough of SideChain ReAction
Sent from my iPhone using Tapatalk
This Is LUST3R!
(Dubstep/EDM/Alternative - Music Producer, Reason User , DJ & Instrumentalist)
Check out my Soundcloud and FOLLOW ME!
https://soundcloud.com/lust3rofficial
(Dubstep/EDM/Alternative - Music Producer, Reason User , DJ & Instrumentalist)
Check out my Soundcloud and FOLLOW ME!
https://soundcloud.com/lust3rofficial
- Reasonistas
- RE Developer
- Posts: 876
- Joined: 15 Jan 2015
- Location: Morristown, NJ USA
- Contact:
Yes, this is a work in progress.LUST3R wrote:Do you think you will make a full on tutorial video for SideChain ReAction for people completely new to this kind of FX of what every button and dial does? Like Speo did when he released FrameCV on YouTube, it would be great to hear someone do a in depth walkthrough of SideChain ReAction
- Reasonistas
- RE Developer
- Posts: 876
- Joined: 15 Jan 2015
- Location: Morristown, NJ USA
- Contact:
That's great!Noel G. wrote:Yes, this is a work in progress.LUST3R wrote:Do you think you will make a full on tutorial video for SideChain ReAction for people completely new to this kind of FX of what every button and dial does? Like Speo did when he released FrameCV on YouTube, it would be great to hear someone do a in depth walkthrough of SideChain ReAction
You guys have got it all covered!
I'm loving the RE so far, can't wait to see the things I am overlooking with a tutorial.
Great work guys!
Sent from my iPhone using Tapatalk
This Is LUST3R!
(Dubstep/EDM/Alternative - Music Producer, Reason User , DJ & Instrumentalist)
Check out my Soundcloud and FOLLOW ME!
https://soundcloud.com/lust3rofficial
(Dubstep/EDM/Alternative - Music Producer, Reason User , DJ & Instrumentalist)
Check out my Soundcloud and FOLLOW ME!
https://soundcloud.com/lust3rofficial
I understand the PASS THRU function from the manual but do not see its interest or use. Maybe I have trouble translating ?Noel G. wrote:Thank you. Let us know if there if anything is unclear in the manual.
Is it to hear the work of Envelopes when REASON is stopped, for example since it is a synchronization effect ?
Maybe frog974 can help me, in French!
- frog974new
- Posts: 352
- Joined: 16 Jan 2015
- Contact:
Geronimo ^^geronimo wrote:I understand the PASS THRU function from the manual but do not see its interest or use. Maybe I have trouble translating ?Noel G. wrote:Thank you. Let us know if there if anything is unclear in the manual.
Is it to hear the work of Envelopes when REASON is stopped, for example since it is a synchronization effect ?
Maybe frog974 can help me, in French!
L'explication est très simple .
L'utilité du Pass THRU est de pouvoir entendre le son qui transite par ce rack extension lorsque on n'appuie pas sur play , ou que ce même rack extension n'est pas "triggée" par d'autre utilitaire tel que le "pattern Matrix" de reason .
Petit exemple , créer un Dr.Octorex , puis créer un SideChain ReAction ( ne nouveau rack extension , directement cablé à a sortie audio du Dr.octorex) . Lorsque notre séquenceur est à l'arrêt ( pas de "Play" ) si l'on souhaite pouvoir entendre notre boucle Rex , il faut que Pass THRU " soit activer et on entendra le son sans effet .
Finalement la fonction Pass Thru agit un peu comme une sorte de Bypass pour le module . L'intérêt de la chose est qu'a chaque fois que l'on désire travailler sur notre son de base ( sans effet ) , il suffit juste de faire "stop" dans notre séquenceur , puis une fois notre son ajusté plus qu'à relancer notre morceau avec "Play" . Un gain de temps énorme au lieu à chaque fois soit de faire bypass /on du rack extension par exemple .
- LABONERECORDINGS
- RE Developer
- Posts: 403
- Joined: 16 Jan 2015
- Location: UK
- Contact:
For those who don't understand French, here's the Google translation:
For example:
◙ In a Combinator, add a Thor followed by SCRE.
◙ Set Thor's Mod Matrix so that 'LAST KEY' is rigged to CV out 1.
◙ Loop that CV out 1 to SCRE ALL CV in.
◙ Turn on SCRE PASS THRU to OFF.
◙ Turn on SCRE ALL LOOP, RETRIG and RELEASE.
Now when Thor plays for example a lead or pad sound, SCRE will do the volume controlling of the sound and triggers only when MIDI is on. Since Thor is 'listening' always for the Last MIDI key, you can play chords because you have more than 1 key down. This in turn now makes SCRE a performance tool, which can be time sync'ed to your BPM, but will trigger only when the first note is being played.
We'll look at making some videos to show this, there's a couple of patches that do this already in the SCRE presets
To elaborate further, PASS THRU allows SCRE to have 2 modes. The mode when PASS THRU is ON allows the original signal to 'pass thru' unaffected, until SCRE is triggered, so this is good for say ghost triggers (ala ghost kicks / snares etc) to duck the signal when the trigger is playing - very much like sidechaining into a compressor. When PASS THRU is OFF, you get no dry signal (when mix is at 100%) but when SCRE is triggered whatever audio is being fed into SCRE at that time will be processed and volume ducked. This is so that you could have SCRE as your defining volume control when doing sound designGeronimo ^^
The explanation is very simple.
The use of the THRU Pass is to hear the sound that passes through this rack extension when you do not press play, or that the same rack extension is not triggered by another utility such as the pattern Matrix "of reason.
For example, create a Dr.Octorex, then create a SideChain ReAction (no new rack extension, directly wired to the audio output of Dr.octorex). When our sequencer is stopped (no "Play") if we want to hear our Rex loop, Pass THRU "must activate and we will hear the sound without effect.
Finally the Pass Thru function acts a bit like a Bypass for the module. The advantage of this is that whenever you want to work on our basic sound (no effect), you just have to do "stop" in our sequencer, then once our sound adjusted more than Restart our song with "Play". A huge time saving instead every time either to make bypass / on the extension rack for example
For example:
◙ In a Combinator, add a Thor followed by SCRE.
◙ Set Thor's Mod Matrix so that 'LAST KEY' is rigged to CV out 1.
◙ Loop that CV out 1 to SCRE ALL CV in.
◙ Turn on SCRE PASS THRU to OFF.
◙ Turn on SCRE ALL LOOP, RETRIG and RELEASE.
Now when Thor plays for example a lead or pad sound, SCRE will do the volume controlling of the sound and triggers only when MIDI is on. Since Thor is 'listening' always for the Last MIDI key, you can play chords because you have more than 1 key down. This in turn now makes SCRE a performance tool, which can be time sync'ed to your BPM, but will trigger only when the first note is being played.
We'll look at making some videos to show this, there's a couple of patches that do this already in the SCRE presets
- Reasonistas
- RE Developer
- Posts: 876
- Joined: 15 Jan 2015
- Location: Morristown, NJ USA
- Contact:
Our SideChain ReAction Enveloper #SCRE received 5 stars and this awesome review. Write your #SCRE review @ https://goo.gl/sRN3Px
- Reasonistas
- RE Developer
- Posts: 876
- Joined: 15 Jan 2015
- Location: Morristown, NJ USA
- Contact:
- Reasonistas
- RE Developer
- Posts: 876
- Joined: 15 Jan 2015
- Location: Morristown, NJ USA
- Contact:
- Reasonistas
- RE Developer
- Posts: 876
- Joined: 15 Jan 2015
- Location: Morristown, NJ USA
- Contact:
- Reasonistas
- RE Developer
- Posts: 876
- Joined: 15 Jan 2015
- Location: Morristown, NJ USA
- Contact:
-
- Posts: 4
- Joined: 09 Jun 2020
Is it possible to just trigger the ducking envelope by gate trigger from say korg and then leave the envelope open?
Im having a play but the envelope always closes at the end of the envelope cycle which seems a bit counter productive.
I think maybe I am missing something?
Im having a play but the envelope always closes at the end of the envelope cycle which seems a bit counter productive.
I think maybe I am missing something?
- Reasonistas
- RE Developer
- Posts: 876
- Joined: 15 Jan 2015
- Location: Morristown, NJ USA
- Contact:
Thanks for the inquiry. This seems to be the same question asked in Reasonistas' SCRE forum. We've responded there. https://www.reasonistas.com/forum/sidec ... er-by-gateHyperDiamondz wrote: ↑09 Jun 2020Is it possible to just trigger the ducking envelope by gate trigger from say korg and then leave the envelope open?
Im having a play but the envelope always closes at the end of the envelope cycle which seems a bit counter productive.
I think maybe I am missing something?
I just bought this thing on this BF to have a simple Enveloper, multiband ducker and simple ducker. Now i had some more time to play around and i disliked the basic "duck" patch. So I hooked up my fav compressor for things like this, dialed it in to my taste and looked at the curve. And, wow! Suprisingly it looked different
Ok, i expected this, recorded the CV gain reduction of the compressor and fed this into a Gain control. The result sounded kind of "un-smooth".
Back to SCRE i tried to dial in the curve i wanted and yes, it sounded quite good, even it wasnt that easy to hook up the curve. Than i remembered one reason i wanted to replace the typicall compressor side chain stuff, and that was the CPU usage. So, thanks to the great new feature i enabled the CPU monitor and wow, surprisingly the SCRE consumed at least doubled amount of CPU compared to the compressor. WTF?
Whats even more weird is, that on Bypass SCRE takes 2x, enabled 3x and on sequencer stop 5x the amount of CPU of the compressor
Any explanation, why the CPU usage is higher compared to a simple compressor?
And would it be possible to add manual curving to draw the curves? Maybe with a modifier key? Or to have a modifier key to remove existing points?
Ok, i expected this, recorded the CV gain reduction of the compressor and fed this into a Gain control. The result sounded kind of "un-smooth".
Back to SCRE i tried to dial in the curve i wanted and yes, it sounded quite good, even it wasnt that easy to hook up the curve. Than i remembered one reason i wanted to replace the typicall compressor side chain stuff, and that was the CPU usage. So, thanks to the great new feature i enabled the CPU monitor and wow, surprisingly the SCRE consumed at least doubled amount of CPU compared to the compressor. WTF?
Whats even more weird is, that on Bypass SCRE takes 2x, enabled 3x and on sequencer stop 5x the amount of CPU of the compressor
Any explanation, why the CPU usage is higher compared to a simple compressor?
And would it be possible to add manual curving to draw the curves? Maybe with a modifier key? Or to have a modifier key to remove existing points?
Reason12, Win10
I guess it's because of frequency splitting and fancy graphics (as it's still rendered by CPU for now).
Maybe. Just used one envelope and only simple ducking. No multiband stuff. If it uses 5 times the CPU of a compressor, i take the compressor. Only drawback is the "linear" routing, which means some things need to wait for others, which they didnt need to if everything can be really parallel.
Reason12, Win10
- Reasonistas
- RE Developer
- Posts: 876
- Joined: 15 Jan 2015
- Location: Morristown, NJ USA
- Contact:
Loque, first and foremost, thanks for the support! As antic604 said, custom displays use dsp and the compressor has none. We'll look into dsp usage on standstill and get back to you.Loque wrote: ↑06 Dec 2020Maybe. Just used one envelope and only simple ducking. No multiband stuff. If it uses 5 times the CPU of a compressor, i take the compressor. Only drawback is the "linear" routing, which means some things need to wait for others, which they didnt need to if everything can be really parallel.
-
- Information
-
Who is online
Users browsing this forum: No registered users and 3 guests